RHIC NOTES:
AD/RHIC/RD 1-128
|
|||
|
Number |
Date |
Author (s) |
Title |
|
July 15, 1988 |
D. P. Brown, et al |
Results for the G-11 Outer Tube
Test Piece |
|
|
July 15, 1988 |
J. Griffin (Fermilab) |
Proposed RHIC 160 MHz RF System |
|
|
July 11-15, 1988 |
H. Hahn |
Workshop Goals |
|
|
July 11-15, 1988 |
G. Parzen |
Intrabeam Scattering Results for
a High Frequency RF System |
|
|
July 11-15, 1988 |
J. Wei |
Simulation of Transition and
Transfer |
|
|
July 11-15, 1988 |
J. Cottingham |
RF Cavities and Amplifiers |
|
|
July 11-15, 1988 |
E. Raka |
Beam Transfer AGS/RHIC, Low F -
High F |
|
|
July 11-15, 1988 |
A. G. Ruggiero |
RF Systems Overview |
|
|
July 11-15, 1988 |
E. Raka |
Some Remarks on Feedback and
Feedforward Employed to Reduce Beam Induced Voltages |
|
|
July 11-15, 1988 |
M. Puglisi |
RHIC RF system |
|
|
Aug. 2, 1988 |
K. Prelec |
Acceleration of Pb Ions in the
CERN SPS |
|
|
Sep. 1, 1988 |
J. Claus |
Beam Position Monitor for RHIC |
|
|
Feb. 2, 1988 |
R. Shafer |
Tevatron Beam Position Monitor
System |
|
|
Jan. 3, 1988 |
J. Xu |
The Influence of the AGS Beam
Parameters on the Beam Parameters at the RHIC Injection Point |
|
|
Feb. 21, 1990 |
J. Xu |
The Possible Method to Measure Twiss
Parameters and Emittance of the AGS Ejected Beam |
|
|
Mar. 16, 1990 |
J. Xu |
The Low ß Waist in the Beam
Transport Line for the Stripping Foil SA |
|
|
Apr. 11, 1990 |
H. Hahn |
Gradient Errors & Correction
System Summary |
|
|
Apr. 23, 1990 |
J. Xu |
The Effect of the Stripping Foil
SA on the Injection Beam of RHIC |
|
|
May 9, 1990 |
J. Cottingham |
Populating 114 or 171 RHIC rf
Buckets through Beam Manipulation at Injection |
|
|
May 30, 1990 |
H. Hahn, et al |
Definition of a1
Corrections |
|
|
June 1, 1990 |
L. J. Wolf, et al |
Elastic Moduli of Ultem and Noryl
at Cryogenic Temperatures Using Vibrating Beam Specimens |
|
|
June 13, 1990 |
J. Xu |
The Improvement of the Vertical
Dispersion Matching of the Beam Transport Line Between AGS and RHIC |
|
|
Oct. 4, 1990 |
J. Xu |
The Calculation of the Influence
on Beam Parameters in RHIC and Beam Size in Transport Line due to Change of
AGS Beam Parameters |
|
|
Oct. 11, 1990 |
H. Hahn, et al |
RHIC Ring Element Nomenclature
System |
|
|
Nov. 28, 1990 |
E. C. Raka |
RHIC RF System Noise
Requirements |
|
|
Apr. 22, 1991 |
R. McKenzie-Wilson, et al |
On the Possible Use of the CERN
200-MHz Cavities for the RHIC Beam Storage System |
|
|
Oct. 23, 1991 |
A. J. Stevens |
Radiation Levels at Floor Level
from Local Beam Loss in RHIC |
|
|
Oct. 28, 1991 |
E. B. Forsyth, et al |
Pulsed Power Supplies for RHIC |
|
|
Oct. 29, 1991 |
K. C. Wu |
Thermal Behavior of MAGCOOL
Cryogenic System during Quenches of RHIC 009 |
|
|
Nov. 18, 1991 |
G. Parzen |
The Beam <-Spread Due to the
Random b3 and the Random b4 and its
Correction |
|
|
Nov. 25, 1991 |
K. C. Wu |
Quench Behavior of MAGCOOL Cryogenic
System with an Inline Cold Surge Tank |
|
|
Dec. 23, 1991 |
R. Alforque, et al |
IMC Post: A Comparison of QC
Tensile Tests, and Finite Element Analysis Results |
|
|
Jan. 7, 1992 |
A. J. Stevens |
Preliminary Study of Energy
Deposition Downstream of the Internal Dump |
|
|
Jan. 13, 1992 |
J. Guilmette |
Engineering Analysis of Vacuum
Pump Requirements of AGS/RHIC Beam
Transfer Line |
|
|
Jan. 14, 1992 |
J. Xu |
Study on the Tolerances of the
Big Bend |
|
|
Jan. 30, 1992 |
N. Tsoupas, et al |
Temperature Increase of the Foil
Stripping Material in the AGS-RHIC Beam Transfer Line |
|
|
Feb. 25, 1992 |
K. C. Wu |
Performance of the MAGCOOL -
Subcooler Cryogenic System After 50 mm SSC Dipole Quenches |
|
|
Mar. 18, 1992 |
D. P. Brown |
RHIC Cryogenic System Equipment Identification
System and Schematic Symbols |
|
|
Apr. 14, 1992 |
K. C. Wu |
Comparison of Total Cooling
Provided to the Energy Released After Low Current Quenches of SSC Dipoles in
MAGCOOL |
|
|
May 14, 1992 |
S. Kane |
Fracture Toughness Requirements
for RHIC Cryogenic Design |
|
|
June 3, 1992 |
A. J. Stevens |
Maximum Energy Deposition
Densities in the Internal Dump |
|
|
Aug. 11, 1992 |
J. Rose |
Conceptual Design of Ferrite
Turners for the RHIC 26 MHz Accelerating Cavity |
|
|
Aug. 21, 1992 |
M. A. Goldman |
The RHIC Reference Geometry |
|
|
Sep. 2, 1992 |
R. J. Todd, et al |
Outgassing Rate of Reemay Spunbonded
Polyester and Dupont Double Aluminized Mylar |
|
|
Sep. 14, 1992 |
A. J. Stevens |
Betatron Scraping at RHIC:
General Remarks and Sample Calculations |
|
|
Nov. 1, 1992 |
K. C. Wu |
Thermal Behavior of MAGCOOL
Cryogenic System after Low Current Quenches of RHIC Magnet DRD-009 |
|
|
Nov. 9, 1992 |
A. Ratti |
A Multipactoring Analysis of the
Accelerating Cavity for RHIC |
|
|
Nov. 12, 1992 |
A. J. Stevens |
Radiation Environment and
Induced Activity Near the RHIC Internal Beam Dump |
|
|
Nov. 24, 1992 |
K. C. Wu |
Peak Loop Pressure and Peak
Temperature in the MAGCOOL-Subcooler Cryogenic System after Low Current
Quenches of SSC Dipole DCA213 |
|
|
Dec. 11, 1992 |
W. C. Wu, et al |
An Experimental Study of
Catastrophic Loss of Vacuum for RHIC DRD-009 in MAGCOOL |
|
|
Dec. 16, 1992 |
K. C. Wu |
Cold Vacuum Compressor for RHIC
Helium Refrigerator |
|
|
Jan. 4, 1993 |
M. Harrison, et al |
Beam Loss Scenario in RHIC |
|
|
Feb. 23, 1993 |
K. C. Wu |
Performance Requirement for the
RHIC Circulating Compressors |
|
|
Feb. 26, 1993 |
K. C. Wu, et al |
An Experimental Study Using Helium
to Produce a Catastrophic Loss of Vacuum in a RHIC Dipole Magnet Cryostat |
|
|
Mar. 23, 1993 |
R. Alforque |
Structural Analysis of the RHIC
Dipole Magnet Assembly |
|
|
Apr. 13, 1993 |
A. Pei |
Numerically Controlled Phase
Locked Loop Using Direct Digital Synthesizer |
|
|
Apr. 13, 1993 |
A. Pei |
Direct Digital Phase Shift by
DDS rf Source |
|
|
May 3, 1993 |
V. Mane, et al |
Implementation of the TRL
Algorithm for Improved Impedance Measurements |
|
|
July 21, 1993 |
K. C. Wu |
Performance of the 350 HP
Sullair Oil Screw Compressor |
|
|
July 21, 1993 |
S. Kane, et al |
RHIC Dipole Longitudinal Weld
Evaluation |
|
|
Aug. 4, 1993 |
C. R. Conkling, et al |
RHIC Timeline System |
|
|
Oct. 11, 1993 |
M. Iarocci |
Warm-up of Dipole 012 |
|
|
Dec. 9, 1993 |
H. Hartmann, et al |
RHIC Real Time Data Link System |
|
|
Dec. 27, 1993 |
K. C. Wu |
Pressure Relief for RHIC
Cryogenic System |
|
|
Jan. 12, 1994 |
A. J. Stevens |
An Approximate Method for
Evaluating Neutron Punch Through in Certain Classes of Shielding Penetrations |
|
|
Feb. 3, 1994 |
H. Hahn |
Transmission Line Analysis of
Dielectric-Loaded Ferrite Kicker |
|
|
June 3, 1994 |
H. Hahn, et al |
Transmission Line Analysis of
Dielectric-Loaded Ferrite Kicker |
|
|
Jun. 22, 1994 |
W. Q. Feng |
Comments on RHIC Beam Abort
Sweeper Magnet |
|
|
Jun. 24, 1994 |
J. Rank |
Results of Sextant Warm-Up
Transient Analysis |
|
|
Jun. 30, 1994 |
S. Kane, et al |
RHIC Dipole Beam Tube-to-End
Flange Weld Evaluation |
|
|
Aug. 3, 1994 |
K. C. Wu |
Safety Relief for RHIC Vacuum
Tank |
|
|
Aug. 11, 1994 |
M. Iarocci |
Calculation of Oxygen Deficiency
Hazard Classes for RHIC |
|
|
Aug. 11, 1994 |
M. Iarocci, et al |
FMEA RHIC Cryogenics |
|
|
Aug. 15, 1994 |
K. C. Wu |
Process Performance and Carnot
Efficiency for RHIC Refrigerator |
|
|
Oct. 13, 1994 |
N. Tsoupas, et al |
Closed Orbit Calculations at AGS
and Extraction Beam Parameters at H13 |
|
|
Oct. 25, 1994 |
P. J. Gollon |
Shielding of Multi-Leg
Penetrations into the RHIC Collider |
|
|
July 1, 1996 |
P. J. Gollon |
Amendment to Shielding of
Multi-Leg Penetrations into the RHIC Collider |
|
|
Oct. 26, 1994 |
A. J. Stevens |
Radiation Field in the Vicinity
of the Collider Center |
|
|
Nov. 1, 1994 |
D. P. Brown |
Calculated Volume for the RHIC
Magnet Enclosure |
|
|
Nov. 1, 1994 |
K. C. Wu |
Estimation of Helium Discharge
Rates for RHIC ODH Calculations |
|
|
Nov. 16, 1994 |
K. C. Wu |
Final Design Report Modification
of Cold Box 5 for RHIC Helium Refrigerator |
|
|
Nov. 18, 1994 |
J. R. Preisig, et al |
Estimation of Neutron
Punch-Through in Circular Shielding Penetrations |
|
|
Nov. 23, 1994 |
M. A. Goldman, et al |
Survey Control for the RHIC
Transport Line |
|
|
Dec. 13, 1994 |
A. J. Stevens |
Analysis of Radiation Levels
Associated with Operation of the RHIC Transfer Line |
|
|
Jan. 10, 1995 |
E. B. Forsyth |
Notes on the RHIC Injection
Magnet Pulser Ground System |
|
|
Mar. 1, 1995 |
E. B. Forsyth |
Notes on the RHIC Injection
Kicker |
|
|
Mar. 27, 1995 |
S. Kane, et al |
RHIC Dipole Cold Mass Patch Weld
Evaluation |
|
|
Mar. 28, 1995 |
S. Kane, et al |
RHIC Dipole End Volume Weld
Evaluation |
|
|
May 1, 1995 |
J. DeLalio |
50 Watt Recooler ASME Boiler
Code Calculations |
|
|
Apr. 7, 1995 |
H. Hahn, et al |
Analysis of Eddy Currents in a
Resistive Coating of the Injection Kicker Beam Tube |
|
|
May 17, 1995 |
A. Farland, et al |
RHIC Combined Element Magnet End
Volume Sleeve Evaluation |
|
|
June 6, 1995 |
A. J. Stevens |
End Wall Dose Equivalent
Estimates at 6 O’clock |
|
|
July 5, 1995 |
K. M. Welch |
Contrived Vacuum Impedances in
the Triplet Cryostat |
|
|
Aug. 1, 1995 |
N. Tsoupas, et al |
Calculation of Stresses Induced
by RHIC Beam on a Titanium Foil |
|
|
Sep. 26, 1995 |
A. J. Stevens |
Conceptual Design of the RHIC Dump
Core |
|
|
Sep. 26, 1995 |
H. Hahn, et al |
The Coupling Impedance of the
RHIC Injection Kicker |
|
|
Oct. 4, 1995 |
S. Kane, et al |
RHIC Beam Tube-to-Flange Weld
Evaluation |
|
|
Dec. 22, 1995 |
A. J. Stevens |
Energy Deposition Downstream of
the Internal Dump |
|
|
Apr. 4, 1996 |
A. J. Stevens |
Estimate of High Energy
Punch-Through in Shielding Wall Cracks |
|
|
Apr. 18, 1996 |
K. C. Wu |
Performance of RHIC Refrigerator
I: Flowmeters |
|
|
Apr. 18, 1996 |
K. C. Wu |
Performance of RHIC Refrigerator
II: Turbines |
|
|
Apr. 18, 1996 |
K. C. Wu |
Performance of RHIC Refrigerator
III: Cold Vacuum Compressor |
|
|
May 31, 1996 |
K. C. Wu |
Performance of RHIC Refrigerator
IV: Heat Exchangers |
|
|
Jun. 12, 1996 |
K. C. Wu |
Performance of RHIC Refrigerator
V: Overall Refrigerator Performance |
|
|
Jun. 27, 1996 |
K. C. Wu |
Reynolds Number in MAGCOOL
Subcooler |
|
|
Aug. 30, 1996 |
H. Hahn, et al |
The Coupling Impedance of the
RHIC Injection Kicker System |
|
|
Sep. 10, 1996 |
D. Bruno |
ATR Power Supplies |
|
|
Nov. 21, 1996 |
K. C. Wu |
Performance of VJRR, Six O’clock
Valve Boxes and Circulating Compressor |
|
|
Dec. 26, 1996 |
S. Kane |
Failure Mode Effects Analysis
for the RHIC Cryogenic Distribution System First Sextant Test Configuration |
|
|
Jan. 2, 1997 |
H. Hahn, et al |
RHIC Injection Kicker Design
Studies |
|
|
Mar. 17, 1997 |
R. Connolly, et al |
A Prototype Ionization Profile
Monitor for RHIC |
|
|
Mar. 20, 1997 |
H. Hahn, et al |
On the Low-Frequency Coupling
Impedance of Transmission Line Kickers |
|
|
Apr. 9, 1997 |
H. Hahn, et al |
Equivalent Circuit Analysis of
the RHIC Injection Kicker |
|
|
Apr. 15, 1997 |
A. J. Stevens |
Radiation Safety Considerations
Near Collimators |
|
|
Jun. 10, 1997 |
A. J. Stevens |
A Simple Model for Extrapolating
Dose from Penetration Exits |
|
|
Aug. 20, 1997 |
A. J. Stevens |
Comparison of CASIM with the
LAHET Code System |
|
|
Oct. 14, 1997 |
R. Davis, et al |
Vacuum System Performance for the
First Sextant Test of the Relativistic Heavy Ion Collider |
|
|
Oct. 22, 1997 |
A. J. Stevens, et al |
Simulation of Detector
Background Due to Beam Halo in RHIC |
|
|
Jan. 27, 1998 |
R. Connolly |
Decoherence of Betatron
Oscillations in RHIC |
|
|
Mar. 25, 1998 |
J. Rank |
RHIC Warm-to-Cold Transition: Heat Load Analysis of the Placement on the
Beam Tube of the Lug for the Braided Heat Sink Strap |
|
|
Jun. 12, 1998 |
S. Kahn, et al |
Estimates of Dose Equivalent
Associated with Penetrations in the PHENIX Shield Wall |
|
|
July 17, 1998 |
A. J. Stevens |
Dose Equivalent Estimates at the
12 O’clock IR |
|
|
Aug. 31, 1998 |
A. J. Stevens |
Improved Estimation of dose Near
Vent Exits in the RHIC Collider Tunnel |
|
|
Feb. 8, 1999 |
S. Kane |
F. M. E. A. RHIC Cryogenics |
|
|
Feb. 16, 1999 |
M. Gaffney |
Failure Mode and Effects RHIC
Cryogenic Liquid Storage Area |
|
|
Feb. 16, 1999 |
R. Connolly |
Transverse Phase Space
Reconstruction of the RHIC Beam |
|
|
July 2, 1999 |
S. Kahn, et al |
Estimates of Dose Equivalent
Through the Wide Angle Hall End Wall |
|
|
Aug. 3, 1999 |
H. Hahn, et al |
Operation of the RHIC Beam Dump
Thyratron CX1575C |
|
|
Sep. 15, 1999 |
A. J. Stevens |
Improved Estimates of Fault Dose
Exterior to the PHENIX South Side Shield Configuration |
|